Please visit our Forum... 

Free Message Forum from Bravenet.com 

The H22A/F22/F23 Alternator/Tensioner kit is for either the H or D series alternators on the H22A/F22/F23 engine.  Just switching the factory bracket out will drop a few lbs. and our kit hugs the engine more.  Ideal for motor swaps with no room.  Also looks better then the bulky factory cast iron piece.  The D series alternator is smaller and lighter, smaller pulley, smaller belt, 3 ribbed instead of 6 has less drag and should free up some ponies.  From switching the H22A alternator and factory bracket to our kit and the D series alternator there is about 6 lbs in weight savings.  Our kits come complete with bolts, nuts, washers and detailed instructions. 

We can also make the Upper/Lower kits for you H2B guys that removed the balance shafts and are 1/2" over to the passenger side.  Just like Matt's (skunked on H-T) All Motor H2B DC drag car pictured below.  Or if you guys have a Kaizen Speed balance shaft eliminator kit please let us know.

***On the EF chassis 88-91 Civic/Crx and H2B you must run either Upper D or H 1/2" over alternator kit.  OEM spec will not clear because of the lack of room on the H2B EF swap on the driver side.  Lower Alternator kits wont work either because how far over it is and the alternator will hit the radius rod.***

H22A/F22/F23 Upper Alternator/Tensioner Kit

 

Apexi-USA's Time Attack H2B car is running one of our H Series Alternator/Tensioner Kits...

...................................................................................................................................................................

H22A Upper D series Alternator/Tensioner kit picture below. 

$90 shipped US

H22A Upper H series Alternator/Tensioner kit picture below. 

$90 shipped US

 

H22A/F22/F23 Lower Alternator/Tensioner Kit

We just came out with yet another alternator/tensioner bracket kit for the H or D series alternator to run on the H22A/F22/F23 that is mounted even lower then the above kits for high performance all motor and turbo applications to clear intercooler piping and or wild manifold designs. 

$115 shipped US

Belt sizes for the Alternator/Tensioner Kits

Alternator/Tensioner kit                                   Length       Store/Part#

Upper H series with OEM 6” crank pulley      32.5"          6 ribbed     

Napa Micro V 060325

Upper D series with OEM 6” crank pulley      32.0"         3 ribbed     

Schucks Goodyear  4030320

Lower H series with OEM 6” crank pulley     30.5"         6 ribbed    

Napa Micro V 25-060305

Lower D series with OEM 6” crank pulley     29.5"         3 ribbed   

Schucks Dayco 5030295