DA 90-93 Acura Integra H22A
Motor Mount Kit
This kit is for the hardcore DA enthusiast wanting the ultimate engine swap. This kit is perfected for the ultimate driving experience and it will keep the power on the ground where it needs to be. No violent shaking or vibration. Just a smooth, accelerating driving experience.
Works with all ABS and Non ABS DA 90-93 Acura Integra's 2 door and 4 door. All Models, RS,LS,GS and GSR.
This motor swap is a near bolt in. Requires a tiny bit of clearance on the rear cross member the lip only. Our instructions that are included are detailed with pictures. The kit will also require you to drill a new passenger side transmission mount hole. Which are template is included to show you exactly where the new hole is. Our detailed instructions will guide you through the process. Don’t hesitate to email me with any questions on the installation. If you are local and would like us to do the install we can do it!
DA 90-93 Acura Integra H22A Motor Mount Kit complete kit includes:
(1) Driver side motor mount
(1) Rear engine mount
(1) Rear chassis mount
(1) Weld in or bolt in passenger side chassis mount, prefer weld in.
(1) Passenger side motor mount
(1) Alternator upper bracket and bolts
(1) Tensioner bracket for upper (your choice of bracket for either H series or D series alternator). Pictured below.
(1) Clutch cable/hydro conversion lever system (pictued below)
(1) Passenger side chassis new hole template only for 90-93 DA H22A motor mount kit
$459+$15 for shipping = $474 shipped US
- If you want the Lower H22A Alternator/Tensioner kit for either H or D series alternators instead of the Upper please let us know an additional $20 will be added onto the motor mount kit price.
The Polyurethane 70A grade inserts are easily replaceable unlike most other kits. Choice of Black or Red insert colors. Powder coating finish is semi gloss black.
Upon purchase please include the following:
Year and Model of Car... Ex: 90 Integra LS
Your selection of Red or Black inserts...
Your selection of Upper H or D series Alternator/Tensioner Kits...
DA H22A Key Parts List:
Axle Combo:
- 90-93 Acura Integra driver side axle (your stock one that is in the car)
- 90-93 Honda Accord Ex or Lx model midshaft
- 88-89 Acura Integra passenger side axle that has an Accord 90+ Inner joint put on it. Raxles.com sells this 1 custom axle. Ask for Marty.
Cable Shifter Assembly:
90-93 Honda Accord cable shifter assembly and cables will work with the swap or 92+ Prelude. Make sure you keep all the washers and clips organized.
Wiring Options:
90-91 Acura Integra OBD0
92-93 Acura Integra OBD1
OBD0-OBD1 conversion is a must. 2 ways to go about it pick up a RYWIRE (Rywire.com) OBD0-OBD1 jumper harness and doing the wiring your self, mostly extending wires to reach on the H22 engine and maybe a few plug swaps from H22 harness to DA. Roughly about a day's work. Easier to do the wiring adjustments when engines out of car. Or last option is the easiest and which I prefer saves wiring headaches and mistakes. Purchasing a custom RYWIRE (Rywire.com) OBD0-OBD1 DA H22A plug and play harness already made. Took me 10 min to put on :). Just send them your factory DA engine harness and the H22A engine harness and about $300 and they will make your custom harness. Looks real nice and simple I use them for all our DA H22 swaps. I can't say enough good about them. If you purchase a custom plug and play harness from Rywire make sure you list your Year and Model of DA and which year the H22 engine is and whether it's internal coil distributor or external and which ECU choice your using either P28 modified or P13 Prelude. 92-93 Integra's DA H22A custom plug and play harness will be a little cheaper being that it's already OBD1. Still some wiring envolved. Adding Vtec wires and IAB (secondaries) and a few more wire extensions.
